Rancang Bangun Alat Ukur Kekentalan Oli Sae 10-30 Menggunakan Metode Falling Ball Viscometer (FBV)

Authors

  • Asi Noflanda Arsis
  • Dahyunir Dahlan
  • Harmadi Harmadi
  • Muharmen Suari

DOI:

https://doi.org/10.25077/jif.9.2.76-86.2017

Abstract

Alat ukur kekentalan oli SAE 10-30 telah dirancang bangun dengan menggunakan metode Falling Ball Viscometer (FBV) small tube. Tabung yang digunakan berukuran kecil dengan panjang 15 cm dan diameter 5,5 mm. Alat ukur dilengkapi dengan dua sistem sensor yaitu Light Emitting Diode (LED) infra merah dan fotodioda.  Data waktu tempuh bola magnetik yang direkam oleh sistem sensor diproses oleh mikrokontroler Arduino nano untuk kemudian ditampilkan dalam bentuk nilai kekentalan pada layar Liquid Crystal Display (LCD). Temperatur pengukuran divariasikan dari 30 oC sampai 100 oC. Nilai regresi yang di peroleh saat temperatur dinaikkan yaitu 0,991. Nilai Regresi pada saat temperature diturunkan yaitu 0,977. Nilai regresi yang didapatkan menunjukkan bahwa alat yang telah dirancang bekerja dengan baik dan dapat digunakan untuk menentukan nilai kekentalan oli SAE 10-30.

 

Kata kunci: Falling Ball Viscometer (FBV), Arduino Nano, Kekentalan, Oli SAE 10-30, Temperatur.

Downloads

Download data is not yet available.

Downloads

Published

2017-09-01

How to Cite

Arsis, A. N., Dahlan, D., Harmadi, H., & Suari, M. (2017). Rancang Bangun Alat Ukur Kekentalan Oli Sae 10-30 Menggunakan Metode Falling Ball Viscometer (FBV). JURNAL ILMU FISIKA, 9(2), 76–86. https://doi.org/10.25077/jif.9.2.76-86.2017

Issue

Vol. 9 No. 2 (2017): September 2017

Section

Research Article

Citation Check

License

Please find the rights and licenses in JIF (Jurnal Ilmu Fisika).

1. License

The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial 4.0 International License.

2. Author's Warranties

The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).

3. User Rights

JIF's spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, JIF permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JIF on distributing works in the journal.

4. Rights of Authors

Authors retain the following rights:

  • Copyright, and other proprietary rights relating to the article, such as patent rights,
  • The right to use the substance of the article in future own works, including lectures and books,
  • The right to reproduce the article for own purposes, provided the copies are not offered for sale,
  • The right to self-archive the article.

5. Co-Authorship

If the article was jointly prepared by other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement.

6. Termination

This agreement can be terminated by the author or JIF upon two months's notice where the other party has materially breached this agreement and failed to remedy such breach within a month of being given the terminating party's notice requesting such breach to be remedied. No breach or violation of this agreement will cause this agreement or any license granted in it to terminate automatically or affect the definition of JIF.

7. Royalties

This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by JIF or its sublicensee.

8. Miscellaneous

JIF will publish the article (or have it published) in the journal if the article's editorial process is successfully completed and JIF or its sublicensee has become obligated to have the article published. JIF may conform the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers.