Pengaruh Panjang Serat Sabut Kelapa terhadap Kuat Tekan dan Kuat Lentur Beton
DOI:
https://doi.org/10.25077/jif.1.1.26-30.2009Abstract
Telah dilakukan penelitian tentang pengaruh panjang serat sabut kelapa dan proporsi penambahan dan pengurangan pasir terhadap kuat tekan dan kuat lentur beton melalui proses pembuatan beton secara manual. Panjang serat yang digunakan adalah 1 cm, 3 cm dan 5 cm. Variasi pasir dibuat dengan penambahan dan pengurangan pasir sebanyak 5% dan 10% dari massa awal pasir. Ukuran balok yang digunakan adalah 22 cm x 11 cm x 6 cm. Kuat tekan dan kuat lentur maksimum rata-rata yang diuji dengan Unit Testing Machine didapat pada panjang serat 3 cm sebesar 73,40 kg/cm2 dan 29,95 kg/cm2. Untuk penambahan dan pengurangan pasir sebanyak 5% dan 10% tidak menghasilkan perubahan yang berarti. Dari penelitian ini didapatkan bahwa panjang serat yang baik untuk pembuatan beton diperkuat serat adalah 3 cm.
Downloads
References
Dailis, 2001, Pembuatan Beton Berserat, Universitas Negeri Padang
Nawy, E. G., 1992, Beton Bertulang Suatu Pendekatan Mendasar, Departemen Sipil dan Rekayasa Lingkungan, Universitas Rutgers New Jersey, Eresco, Bandung
Rizal, S., 2002, Evaluasi Industri Pengolahan Limbah Kulit Kelapa untuk Menghasilkan Serabut di Sumatera Barat, Tesis, Universitas Andalas
Suparjo, 2003, Jurnal Pemanfaatan Serat Bambu untuk Dinding Beton Ringan Tanpa Pasir Pracetak Tulangan Bambu dengan Agregat Batu Apung, Majalah Iptek
Ulfa, M., Pengaruh Penambahan Serat Sabut Kelapa terhadap Kuat Tekan dan Kuat Lentur Beton, Skripsi, Universitas Andalas
Wuryati, S. dan Rahmadiyanto, C., 2001, Teknologi Beton, Kanisius, Yogyakarta
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
Please find the rights and licenses in JIF (Jurnal Ilmu Fisika).
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial 4.0 International License.
2. Author's Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3. User Rights
JIF's spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, JIF permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JIF on distributing works in the journal.
4. Rights of Authors
Authors retain the following rights:
- Copyright, and other proprietary rights relating to the article, such as patent rights,
- The right to use the substance of the article in future own works, including lectures and books,
- The right to reproduce the article for own purposes, provided the copies are not offered for sale,
- The right to self-archive the article.
5. Co-Authorship
If the article was jointly prepared by other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement.
6. Termination
This agreement can be terminated by the author or JIF upon two months's notice where the other party has materially breached this agreement and failed to remedy such breach within a month of being given the terminating party's notice requesting such breach to be remedied. No breach or violation of this agreement will cause this agreement or any license granted in it to terminate automatically or affect the definition of JIF.
7. Royalties
This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by JIF or its sublicensee.
8. Miscellaneous
JIF will publish the article (or have it published) in the journal if the article's editorial process is successfully completed and JIF or its sublicensee has become obligated to have the article published. JIF may conform the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers.